Rooted field guides · Water & sanitation · Edition 01

Water that stays clean.

A settlement water system from roof and spring to well, tank, filter, toilet and greywater bed — designed as a chain, not a collection of gadgets.

Water is the easiest thing to collect and the easiest thing to ruin. A clean source can be contaminated by a bucket, a leaking wellhead, a latrine uphill, or a greywater puddle beside the kitchen door. The system matters more than the source.

  • Source protection
  • Safe storage
  • Sanitation first
  • Test, don't guess
Sources
04Rain, springs, wells and ponds.
Barriers
03Protect, treat, keep clean.
One chain
06Steps from catchment to return.
Diagram of a water system with roof catchment, tank, filter, well, composting toilet, compost bin, greywater basin and pond.
Rain, well, filter, toilet and greywater are one system. Change one part and the others respond.

The whole system

A water system is a chain

Water is clean at the source, clean in the store, clean at the tap and clean at the toilet. Every link has to hold; one neglected link contaminates the rest.

  1. Catchment or source

    Roof, spring, well or pond. Protect the source from animals, runoff, latrines and chemicals before the water reaches a tank.

  2. Storage

    A covered tank, underground cistern or reservoir. Store cool, dark and covered; screen the inlet and overflow; keep the outlet above the sediment.

  3. Treatment

    Filter, boil, chlorinate or solar-disinfect. Treatment is a barrier, not an excuse for a dirty source. Test what comes out.

  4. Use

    Drinking, cooking, washing, livestock and irrigation. Keep drinking-water containers separate and never dip a dirty cup into a clean store.

  5. Sanitation

    Toilet, handwashing and safe containment of human waste. This is the link most likely to contaminate a well or pond.

  6. Return

    Greywater to a mulch basin or planted bed; composted human waste to non-food crops after proper treatment; runoff to a rain garden.

Choose the source

Four sources, four sets of rules

Most settlements use more than one source: rain in the wet season, a spring or well in the dry, a pond for fish and irrigation. Design them as backups, not duplicates.

Defence in depth

Three barriers, not one

No single step makes water safe. Source protection, treatment and clean handling are separate barriers; if one fails, the others still help.

  1. Protect the source

    Seal the wellhead, fence the spring, keep latrines, manure and animals away, divert runoff, and keep the catchment vegetated. This is the cheapest and most reliable barrier.

  2. Treat the water

    Filter, boil, chlorinate or solar-disinfect according to the risk. Use a tested method and follow the dose and contact time; a dirty filter or a weak chlorine dose can give false confidence.

  3. Keep it clean

    Covered storage, a clean tap or bucket, handwashing, and separate containers for drinking water. Most contamination after treatment comes from hands, cups and dirty storage.

The quiet source

Springs and gravity

A spring is a natural overflow of groundwater. If it is reliable and protected, it can supply a settlement with no pump and no fuel.

Find the true outlet, not a seep that appears only after rain. Dig back carefully to the source, build a spring box of stone, brick or concrete with a removable lid, and collect the water from a clean outlet. Seal the box against surface water, fence it from animals, and pipe it to a covered tank or standpipe with a continuous fall. A spring box is a capture structure, not a filter: test the water and protect the catchment.

Gravity systems need a reliable fall, a pipe that can be drained and cleaned, and an overflow that does not erode the slope. Keep a spare length of pipe and fittings. If the spring is low in summer, plan a second source or storage before the dry season.

Do not dig out a spring without advice. A spring can be a legally protected water source, and uncontrolled excavation can collapse the outlet or contaminate it. Check water rights and get local guidance.

The other half of the system

Sanitation is water infrastructure

A well is only as safe as the nearest latrine, manure heap or greywater puddle. Sanitation belongs in the water plan from the first day.

Human waste contains pathogens that can reach a well through groundwater, a flooded pit, flies or contaminated hands. A toilet is not enough: it needs a safe containment, a vent, a cover, handwashing and a plan for the compost or sludge. Greywater carries soap, grease, food particles and sometimes chemicals; it needs a planted basin or wetland, not a puddle beside the door.

Open sanitation and greywater

A first system

What to build first

You do not need every source. Build one reliable source, one store, one treatment barrier, one toilet and one greywater bed — then improve.

  1. Map every water source, drain, latrine, manure store and chemical store on the site. Mark the downhill direction.
  2. Protect the best source first: wellhead, spring box, roof catchment or pond bank.
  3. Add covered storage sized for at least the dry spell you actually expect — not the average year.
  4. Set up one treatment method you will maintain: filter, boil, chlorine or SODIS.
  5. Build a toilet with a safe pit or chamber, a vent, a cover and a handwashing point.
  6. Route greywater to a mulch basin or planted bed away from the well and the kitchen.
  7. Test the water at the start of the wet season and after any flood, taste change or repair.
  8. Write a maintenance card: who cleans what, when, with which spare parts.

Keep the system honest

What to measure

A water system fails quietly. Measure the things that would tell you before the household does.

Five measures for the settlement notebook.
MeasureA good signStart with
Source yieldThe source still produces at the end of the dry season.Well recovery test or spring flow measurement.
Storage daysAt least the length of the longest dry spell or supply interruption you expect.Tank size and daily use record.
Water qualityNo bacterial contamination; no unusual colour, smell or taste.Local lab or test kit; retest after floods and repairs.
Sanitation separationLatrines, manure and greywater are downhill and well away from water sources.Site map with 30 m separation and drainage arrows.
MaintenanceGutters, screens, filters and covers are intact; spares are in store.Monthly walk-around and a written repair log.

Scope and safety

Water is a system, not a product.

These pages describe general principles and small-scale methods. They are not a substitute for local water testing, engineering, public-health advice or water law.

Before you build or change a water system:

  • Check water rights, permits, setbacks and protected areas.
  • Test the water; do not assume a clear source is safe.
  • Keep latrines, manure, fuel and chemicals away from sources and downhill.
  • Get engineering advice for tanks, dams, retaining walls and deep wells.
  • Treat all surface water as microbiologically unsafe unless tested and protected.

Use the well guide for source construction, the landscape guide for slope and planting, and the site atlas for local ground and water context.

Start with the source you already have.

Protect one spring, fit a first-flush diverter to one roof, cover one tank, or build one toilet with a handwashing point. Then measure what changed.