A fleece is a year of sheep growth, full of grease, dust and vegetable matter. Turning it into cloth is a chain of small skills — sorting, washing, carding, spinning, plying, weaving, fulling — and a failure at any stage shows up at the end. The good news is that every step can be practised on a handful of wool before you commit a season’s fleece.
A fleece is not yet cloth
Wool is a protein fibre with a scaly surface. Those scales let fibres lock together when they are wetted and agitated — which is how felt is made, and also how a fleece can be ruined in the wash. The same property gives wool its warmth, elasticity and ability to shed water. Different breeds produce very different fleeces: fine merino for next-to-skin cloth, long lustrous fleeces for worsted yarn, carpet wools for durability, and double-coated breeds with a soft undercoat and a hairy outer coat.
A fleece weighs roughly 2–5 kg, and 50–75% of that may remain after skirting and washing. Plan on a lot of preparation for a little yarn. A medium fleece might yield 1–2 kg of clean fibre, enough for a large shawl or a small blanket — not a wardrobe.
Skirt and sort
Spread the fleece on a clean sheet, cut side down. Remove the skirtings: the dirty edges, belly wool, leg wool and any felted or manure-covered pieces. Shake out second cuts and vegetable matter. Sort the remaining fleece by quality: the softest wool from the shoulders and sides, coarser wool from the britch and neck, and any weak or tender patches.
Keep the best fibre for clothing and the coarser fibre for blankets, bags, insulation or felting. Do not try to wash a whole fleece in one lump; small batches dry faster and are easier to handle.
Scour without felting
Wool carries lanolin, a greasy wax that repels water and holds dirt. Scouring removes it. Use warm water (about 50–60 °C, hot to the hand but not scalding), a mild soap or wool detergent, and as little agitation as possible. The enemy is a sudden change of temperature or rubbing while wet.
-
First bath
Fill a tub with warm water and soap. Lower the wool in gently, press it under the surface, and let it soak for 10–20 minutes. Do not rub, wring or stir.
-
Drain
Lift the wool out in a basket or with both hands, supporting it. Pour away the dirty water. Do not let the wool sit in the dirty water.
-
Second bath
Repeat with fresh warm water and a little soap. The water should be noticeably cleaner. For very greasy fleeces, a third bath may be needed.
-
Rinse
Rinse in warm water at the same temperature as the last bath, twice if needed. Sudden cold water can shock the fibre and set creases.
-
Dry
Squeeze gently — never wring — and spread the wool on a rack or net in a dry, airy place. Turn it once. Do not hang it wet, which stretches the fibres.
Keep the first, greasiest wash water: the lanolin can be used for hand salve or leather dressing after straining. Do not pour it on the garden in quantity; it is oily and slow to break down.
Card and spin
Carding opens the locks, removes residual debris and aligns the fibres so they can be spun. Hand cards are two flat boards covered with fine wire teeth. Place a small tuft of wool on one card, brush the other across it in one direction, transfer the fibre, and repeat until it is fluffy and even. Roll the fibre off the card into a loose sausage called a rolag. For longwool fleeces, flick-card the ends and spin from the lock instead.
A drop spindle is a weighted shaft that hangs from the yarn and adds twist as it turns. Tie a leader to the spindle, attach a strip of fibre, and draft — pull the fibres past each other — while the spindle turns. Let the twist run into the newly drafted yarn, then wind the yarn onto the shaft. Keep the drafting zone thin and even; thick and thin yarn is a choice, not an accident.
Spin a sample first. The amount of twist and the thickness of the yarn determine whether the finished cloth is warm, durable, drapey or scratchy. A tighter twist gives a stronger, harder yarn; a looser twist gives softness and warmth but less abrasion resistance.
Ply and finish the yarn
Single yarn is unbalanced: it wants to twist back on itself. Plying two or more singles together in the opposite direction makes a balanced, stronger yarn. Use a spindle or a simple plywood lazy kate to hold the bobbins, and ply with an even tension. A two-ply is the standard for knitting and weaving; a three-ply is rounder and more durable.
Wind the yarn into a skein, tie it in several places, and wash it gently in warm water to set the twist and remove spinning oil. Hang it to dry with a light weight to straighten it. A skein that kinks and twists when dry was either over-twisted or insufficiently set; a short, gentle soak and a weighted dry usually helps.
Dye the wool
Wool takes dye well, but colour needs a mordant to bind to the fibre. Alum is the most common and comparatively safe, but it is a trade item. Alternatives include tannin from oak galls or bark, iron from rusty nails steeped in vinegar, and stale urine (traditional, unpleasant, and best avoided in a domestic setting). Iron can darken colours and make wool brittle; use it sparingly.
Plant dyes: onion skins give yellow-orange, madder root gives red, weld gives bright yellow, walnut hulls give brown, and woad or indigo give blue — but indigo needs a reducing vat, which is a more advanced chemistry. Most plant colours are fugitive without a mordant and some fade even with one. Test a small skein in sunlight before dyeing a whole fleece.
Dye before or after spinning, but not both. Dyeing yarn gives more even colour; dyeing fleece gives a heathered, varied cloth. Keep dye pots separate from food utensils, and ventilate the workspace.
Weave the cloth
A simple frame loom — a rectangular frame with a row of pegs or a heddle bar — can weave cloth in plain weave (over one, under one) or simple twill. Set the warp (the lengthwise threads) at a spacing that suits the yarn: roughly 8–12 ends per inch for a medium wool, closer for fine cloth, wider for a loose blanket. The weft (the crosswise thread) is passed over and under the warp and beaten into place.
A warp-weighted loom is a vertical frame with clay or stone weights hanging from the warp; it is an ancient and effective way to weave long cloth. A rigid heddle loom is faster but requires a manufactured heddle. Either way, keep the tension even, beat the weft consistently, and leave enough warp for fringe or hems.
Weave a sample first. Wash and full it, then measure the shrinkage. Wool cloth can shrink 10–30% in fulling, and the sett that looked right on the loom may be too loose or too tight after finishing.
Full and finish
Fulling is controlled felting: warm water, soap and gentle agitation make the wool fibres interlock, thickening the cloth and closing the spaces between threads. It makes wool windproof, warmer and more durable. Work in a tub or on a board, knead and roll the cloth, and check it often. Too much agitation or a sudden temperature change can shrink it dramatically or felt it unevenly.
Rinse, roll in a towel to remove water, and dry flat. Brush the surface with a teasel or a stiff brush to raise a nap if you want a softer, more weather-resistant finish. Press with a damp cloth, not a hot iron directly on the wool. Mend small holes promptly; wool’s scales will help a patch felt into place.
Troubleshooting
| Problem | Likely cause | Fix |
|---|---|---|
| Fleece felted in the wash | Too hot, too much soap, agitation | Use cooler water, less soap, no rubbing; felted wool can still be used for felt |
| Yarn breaks constantly | Too little twist, weak fibre, over-drafted | Add twist, use sound fibre, draft more gently |
| Yarn kinks when dry | Over-twisted singles or insufficient plying | Ply in the opposite direction; wash and weight the skein |
| Cloth is stiff and harsh | Coarse wool, too much twist, over-fulling | Use softer fibre, loosen the twist, full gently |
| Cloth shrinks drastically | Fulling too long or too hot | Check every few minutes; accept the shrinkage and plan for it |
Yield and time
A skilled spinner can produce perhaps 50–100 g of medium yarn in an hour with a drop spindle; a beginner will be much slower. Weaving a metre of medium cloth can take several hours, and fulling and finishing add more. A single garment may represent weeks of work. That is not a reason to avoid the craft; it is a reason to value the cloth and to choose projects that suit the yarn you can actually make.
Safety
Hot water and soap. Scouring and fulling use hot water; keep children away and lift heavy wet fleece with care. Dyes and mordants. Alum, iron and plant dyes are not food; use separate pots, gloves and ventilation. Avoid lead, chrome and other toxic mordants. Dust. Carding raises dust and fine fibre; work ventilated and wear a mask if you are sensitive. Repetition. Spinning and weaving strain hands, wrists and back; take breaks and vary the work.
Sources and further reading
- Wikipedia: Wool — fibre structure, breeds and properties.
- Wikipedia: Spinning (textiles) — drafting, twist and spindle methods.
- Wikipedia: Weaving — looms, warp and weft, basic weaves.
- Wikipedia: Fulling — the finishing process that turns woven wool into cloth.