Before cotton, before hemp plantations, people made string from whatever stem, bark or leaf fibre grew nearby. Nettle, flax, lime bark, willow and bramble will all make cordage. With more work, nettle and flax make cloth. The key is to separate the strong inner fibres from the woody core without cutting them short.

The fibres around you

Bast fibres run in the inner bark of stems: flax, hemp, nettle, lime (linden), willow and many others. They are long, strong and flexible, and they are the best primitive textile fibres. Leaf fibres such as yucca and sisal are coarser and shorter. Bark fibres from lime, oak and willow make excellent cordage without retting. Seed hairs — cotton — are wonderful but need a long frost-free season and ginning; they are not a realistic temperate subsistence crop.

Nettle is the most accessible: it grows as a weed, needs no cultivation, and its fibre is strong and fine enough for cloth. Flax gives the best linen and a useful seed crop, but it demands good soil and careful harvesting. Hemp is stronger and coarser, useful for rope and sacks. Lime bark is a superb cordage fibre, stripped in spring when the sap is rising.

Harvest at the right moment

Nettle: cut stems before the plant flowers and sets seed, when the fibre is strongest. Wear gloves and long sleeves; the stings persist on fresh leaves. Cut low, bundle the stems, and let them wilt for a day or two — wilting reduces the sting and makes stripping easier.

Flax: pull the plants rather than cutting them, because the longest fibres run from root to tip. Harvest when the lower leaves yellow and the seed bolls are mature but before the stems become woody. Bundle and stand them in shocks to dry.

Lime and willow bark: strip in spring or early summer, when the bark slips easily from the wood. Cut only what you need, and never ring-bark a tree you want to keep. Use prunings and coppice growth.

Ret the fibre loose

Retting is controlled rotting of the pectin that glues the fibre to the woody core. There are two routes. Water retting is faster and more even: submerge bundles in a pond, stream or tank for 1–3 weeks. Dew retting is slower: spread the stems on grass and turn them occasionally for several weeks. Water retting smells terrible and can pollute a small pond; use a dedicated retting tank or a barrel, not a drinking-water source.

Check the fibre every few days. When it slips easily from the core between finger and thumb, it is ready. Over-retting weakens the fibre; under-retting makes it impossible to separate. Remove the bundles, rinse, and dry them thoroughly before storing.

Break, scutch and hackle

  1. Dry

    Dry the retted stems until brittle. The fibre should still be supple, but the woody core should snap cleanly.

  2. Break

    Use a wooden brake — a hinged wooden blade that folds down onto a grooved board — to shatter the woody core along the length of the stems. Do not cut the fibre; crush the shive.

  3. Scutch

    Hold a bundle and strike it with a wooden paddle or scrape it over a board to remove the broken shive. Work outdoors; this is dusty.

  4. Hackle

    Draw the fibre through a bed of nails or a wooden comb to align it and remove short fibres. Coarse hackles first, finer hackles later. The long, clean fibre — line — is for fine yarn; the short tow is for coarse yarn, stuffing or tinder.

For nettle, the process is gentler: strip the outer fibres from wilted stems by hand, or break the dried stems and rub away the core. For lime bark, separate the inner bark into strips and soak them until pliable; no retting is needed.

Twist cordage

Short fibres can be twisted into a continuous thread by reverse twisting. Take a bundle of fibres, twist it clockwise with one hand while wrapping it counterclockwise around the growing cord with the other. Add new fibres by splicing them into the end as you go. The result is a strong, even cord that gets tighter under load.

For a two-ply cord, twist two singles in one direction and ply them together in the opposite direction. For a rope, ply three or more strands, then lay the rope in the opposite direction again. The alternation balances the twist and prevents kinking. Test a length by hanging a weight from it; a good cord should stretch a little and recover, not sag permanently or snap.

Nettle cordage is strong enough for netting, bags, belts, bowstrings (with care) and lashings. Lime bark makes excellent coarse rope. Flax makes fine, strong thread for sewing and weaving. Label the cord by fibre and date; natural cordage degrades with UV and moisture.

Netting and basketry

Netting is a series of loops and knots made with a netting needle and a mesh stick. It produces fishing nets, game bags, hammocks and carrying nets from a single long cord. Basketry uses whole stems — willow, hazel, bramble, reed — rather than spun fibre. Both are excellent uses for coarser fibre and for the time when fields are too wet to work.

Make a small net first: a mesh stick of the desired hole size, a netting needle loaded with cord, and a gauge line. The knots are simple but easy to get wrong; practice a row before committing to a long net.

Cloth from plant fibre

Nettle and flax can be spun fine enough to weave. The yarn is strong but inelastic, so the loom and the weave must allow for little stretch. A warp-weighted loom is the classic primitive loom: warp threads hang from a top beam, weighted with clay or stone loom weights, and the weaver beats the weft upward. It can produce long lengths of cloth and needs no metal parts.

For a first cloth, use a simple frame loom and a plain weave. Set the warp at 10–16 ends per inch for a medium linen-like cloth; finer yarn needs closer spacing. Wet-spin flax for a smooth, strong thread, or dry-spin for a softer, hairier yarn. Nettle yarn is often spun dry and gives a slightly coarse, hard-wearing cloth.

Plant-fibre cloth has little natural elasticity and wrinkles easily. Wash it gently, dry it flat, and press it damp. It softens with use and lasts for decades if kept dry and mended.

Troubleshooting

Diagnose the fibre before blaming the spinning.
Problem Likely cause Fix
Fibre will not separate Under-retted Ret longer, or use a gentler break and more scutching
Fibre is weak and breaks Over-retted or mouldy Ret for a shorter time; dry thoroughly; discard rotten fibre
Yarn is lumpy Poor hackling or uneven drafting Hackle finer, draft more slowly, overlap joins
Cord untwists under load Twist and ply in the same direction Reverse the ply direction; add more twist
Cloth tears at the seam Yarn too weak or seam too close to the edge Use stronger yarn, allow a wider seam allowance, reinforce

Safety

Nettles sting. Wear gloves and long sleeves; wilt the stems before handling. Retting water. Stagnant retting tanks grow bacteria and smell foul; keep children and animals away, and do not dump the water into a stream or well. Tools. Brakes, hackles and knives cut and puncture; keep hands clear and wear eye protection when scutching. Dust. Breaking and hackling raise fine dust; work outdoors or with extraction. Foraging. Never harvest protected plants or from contaminated ground, and get permission before cutting on land you do not own.

Sources and further reading